BS150/12M/SPORT - 2"

SKU: BS150/12M/SPORT
  • 2" 4 wire hydraulic hose capability
  • 3" 2 wire hydraulic hose capability
  • Dies with colour coding
  • Large aperture
  • 12 VDC supply
  • Standard swaging range 16 to 78mm diam.
  • Extended swaging range 6.5 to 94mm diam.
$0.00 inc GST

A precision 3" nom. swage press for the production of hose assemblies of all types.  Designed specifically for portability, with versatile single phase supply.  The BS150/12M/SPORT uses pinless/push in/pull out dies, enabling change by hand. Single button operation where correct installed diameter is achieved, halted then automatic rapid retract to fully open position.  A versatile swage press able to crimp all hydraulic hoses to 2" diameter / isobaric 4000.

A precision 3" nom. swage press for the production of hose assemblies of all types.  Designed specifically for portability, with versatile single phase supply.  The BS150/12M/SPORT uses pinless/push in/pull out dies, enabling change by hand. Single button operation where correct installed diameter is achieved, halted then automatic rapid retract to fully open position.  A versatile swage press able to crimp all hydraulic hoses to 2" diameter / isobaric 4000.

Products specifications
Swaging Range (mm) with Standard Die Set16 to 78
Extended Swaging Range (mm) with Optional Die(s)6.5 to 94
Max. Die Set Opening (mm + Die Set Size)34
Radial Swaging Force (kN)2200
Cycle Speed (Full Stroke-Complete Cycle sec.)18
Dimensions (mm)600x560x520 mm
Weight (kg without Dies & Oil)130
Supply (Volts)12 VDC
Supply (Amps)300
Power (kW)1.5
Rated Pressure (bar)300
Pump Flow Rate (L/min)4.6+15
Reservoir Capacity (Litres)10
Filtration (um)100
Hose Diameter Capability3"
Hose Wire Capability4, 2, 1

Standard Die Set

Product Number

Range (mm)

BS50SDS

11 die sets supplied as a package to allow infinite swaging between 16 to 78mm finished swage size.

50-16

16 – 20

50-19

19 – 24

50-22

22 – 27

50-26

26 – 31

50-31

31 – 37

50-36

36 – 42

50-41

41 – 48

50-47

47 – 54

50-53

53 – 60

50-60

60 – 68

50-68

68 – 78

Product Files
Datasheets
Products specifications
Swaging Range (mm) with Standard Die Set16 to 78
Extended Swaging Range (mm) with Optional Die(s)6.5 to 94
Max. Die Set Opening (mm + Die Set Size)34
Radial Swaging Force (kN)2200
Cycle Speed (Full Stroke-Complete Cycle sec.)18
Dimensions (mm)600x560x520 mm
Weight (kg without Dies & Oil)130
Supply (Volts)12 VDC
Supply (Amps)300
Power (kW)1.5
Rated Pressure (bar)300
Pump Flow Rate (L/min)4.6+15
Reservoir Capacity (Litres)10
Filtration (um)100
Hose Diameter Capability3"
Hose Wire Capability4, 2, 1
Related products
Picture of Access Rail Picture of Access Rail

Access Rail

An Access Rail to provide for 600mm of slide movement. Because the press is positioned sideways on the rail, when slid out it positions the press as to allow access to the rear to facilitate easy operation. The BSAR is equipped with end of stroke locksand an Interlock contact switch.

$0.00 inc GST
Picture of Die & Tool Rack (suit BS150, BS1140 Series)

Die & Tool Rack (suit BS150, BS1140 Series)

This is a Die and Tool Rack, and is bolted on top of the BSAR Access Rail, behind the swage press. Includes a Quick Change Tool (BS50QCT).

$0.00 inc GST