BS132/24M/SPORT - 1-1/4"

SKU: BS132/24M/SPORT
  • 1-1/4" 4 wire hydraulic hose capability
  • 2" 2 wire hydraulic hose capability
  • Dies with colour coding pins
  • Large aperture
  • 220 VAC supply
  • Single button operation
  • Standard swaging range 16 to 55mm diam.
  • Extended swaging range 6.5 to 68mm diam.
$0.00 inc GST

A precision 1-1/2" nom. swage press for the production of hose assemblies of all types.  Designed specifically for portability, 24VDC with isolator switch for safety.  The BS132/24M/SPORT uses pinned dies with finger pull die retain pins enabling change by hand.  Single Button operation where exact installed diameter is achieved, halted then automatic rapid retract to fully open position.  This machine offers you a simple product with a basic, reliable hydraulic system and no electrical switchgear.

A precision 1-1/2" nom. swage press for the production of hose assemblies of all types.  Designed specifically for portability, 24VDC with isolator switch for safety.  The BS132/24M/SPORT uses pinned dies with finger pull die retain pins enabling change by hand.  Single Button operation where exact installed diameter is achieved, halted then automatic rapid retract to fully open position.  This machine offers you a simple product with a basic, reliable hydraulic system and no electrical switchgear.

Products specifications
Swaging Range (mm) with Standard Die Set16 to 55
Extended Swaging Range (mm) with Optional Die(s)6 to 68
Max. Die Set Opening (mm + Die Set Size)25
Radial Swaging Force (kN)1500
Cycle Speed (Full Stroke-Complete Cycle sec.)22
Dimensions (mm)600x420x570 mm
Weight (kg without Dies & Oil)68
Supply (Volts)24 VDC
Supply (Amps)150
Power (kW)2.8
Rated Pressure (bar)300
Pump Flow Rate (L/min)6
Reservoir Capacity (Litres)5
Filtration (um)100
Hose Diameter Capability2"
Hose Wire Capability4, 2, 1

Standard Die Set

Product Number

Range (mm)

BS32SDS

8 die sets supplied as a package to allow infinite swaging between 16 to 55mm finished swage size.

32-16

16 – 20

32-19

19 – 24

32-23

23 – 28

32-27

27 – 32

32-31

31 – 37

32-36

36 – 42

32-41

41 – 48

32-47

47 – 55

Product Files
Datasheets
Products specifications
Swaging Range (mm) with Standard Die Set16 to 55
Extended Swaging Range (mm) with Optional Die(s)6 to 68
Max. Die Set Opening (mm + Die Set Size)25
Radial Swaging Force (kN)1500
Cycle Speed (Full Stroke-Complete Cycle sec.)22
Dimensions (mm)600x420x570 mm
Weight (kg without Dies & Oil)68
Supply (Volts)24 VDC
Supply (Amps)150
Power (kW)2.8
Rated Pressure (bar)300
Pump Flow Rate (L/min)6
Reservoir Capacity (Litres)5
Filtration (um)100
Hose Diameter Capability2"
Hose Wire Capability4, 2, 1
Related products
Picture of Access Rail Picture of Access Rail

Access Rail

An Access Rail to provide for 600mm of slide movement. Because the press is positioned sideways on the rail, when slid out it positions the press as to allow access to the rear to facilitate easy operation. The BSAR is equipped with end of stroke locksand an Interlock contact switch.

$0.00 inc GST